Column Tubing
Connector Kits
Our convenient partially assembled tube sets quickly connects columns to AKTA™ systems.
Column Tubing Connector Kits
This kit includes partially assembled tube sets used to connect to Omnift columns to AKTA systems. We include torque-limiting 10-32 nuts that prevent over or under tightening connections on the system valve, and potential thread damage. Also included are M6 to 5/16-24 cap adapters that allow the Omnifit columns to be used with the standard connectors that come with AKTA equipment.
Components:
-
2m X 1/16” OD PTFE tube (1.6mm OD by 1mm ID) with ¼-28 UNF fitting at one end. Attaches to standard Omnifit column.
-
0.5m X 1/16” OD PTFE tube (1.6mm OD by 1mm ID) with ¼-28 UNF fitting at one end. Attaches to standard Omnifit column.
-
2 male, torque limiting 10-32 nuts with integral ferrules. Connect 1/16” OD tubing to standard Akta valve and pump ports
-
2 column cap adapters, female M6 port to female 5/16” BSF-Med (22 TPI) port. Used to connect standard Cytiva column connectors to Omnifit columns.